2019 5th International Conference on Electrical Engineering and Information Engineering
Dec. 16-18, 2019, Hangzhou, China
0Days to the Submission Deadline
Important Dates
Submission: Nov. 4, 2019
Conference:Dec. 16-18, 2019
20-40 days after the submission
15-20 days after the final edition
More Conferences
Contact Information
Email: conference123net@126.com
Cell Phone: 0086-18101720867
Telephone: 021-51098086
WeChat: 18101720867
Keynote Speakers

The information about the Keynote Speakers of ICEEIE2019 is as follows, which will be updated regularly.

Dr. Sameh NAJEH, Assistant Professor
High School of Telecommunication in Tunis (SUP’COM), Tunis

Biography: Dr. Sameh Najeh has received her Bachelor Degree in Mathematics in 1999, from the University of Sciences of Tunis, Tunisia, and Master and Ph.D. Degrees in Telecommunications from the National Engineering School of Tunis (ENIT), Tunisia, in 2002 and 2008, respectively. Her research interests lie in signal processing and Digital communication. Currently, she is focusing on Radio Resource Mangement in 5G using game theory. She is currently an Assistant Professor at SUP'COM of Tunis, Tunisia.

Topic: SINR-based Mode Selection and Power Control in D2D Communications

Abstract: There is a wide consensus about the requirements that 5G systems should meet in the near future, where applications coming from diverse use cases and verticals will require to considerably enhance the available bandwidth, the latency reduction improving the Quality of Experience (QoE). The resource allocation and interference issues of device-to-device communications (D2D) is an intersting challenge. Interference management schemes in D2D communication is an intersting topic to enhance the mentioned Radio Resource Management (RRM) approaches. Heterogeneous networks (HetNet) are also a promising solution to improve network performance in terms of spectrum and energy efficiency. In fact, the implementation of femtocell access points with the existing macrocell base stations networks is a good solution not only to ameliorate indoor coverage but also to enhance the capacity of cellular mobile networks. Consequently, the deployment of the femtocell technology will be very useful for both users and mobile network operators because femtocell networks provide better quality of wireless services and data transmission. First, we present different schemes of (RRM) including mode selection, power control, and resource allocation by using GT tools in D2D communication. Second, The overall problem relative to a Heterogeneous networks (HetNet) is formulated as a non-cooperative game where users act selfishly to maximize their utilities while taking into account the interference caused by both the macrocell and the femtocell. We will prove also that there exists a pure strategy Nash equilibria under feasible utility functions. Finally, the operational effectiveness of this approach is evaluated through modeling, simulation and presentation of distinct scenarios that can be happened in the proposed game.

Dr. Tahir Mehmood
Wuhan University of Science and Technology, Wuhan, China

Biography: Dr. Tahir Mehmood is a Visiting Professor at the State Key Laboratory of Refractories and Metallurgy, Hubei Province Key Laboratory of Systems Science in Metallurgical Process, International Research Institute for Steel Technology, Wuhan University of Science and Technology, Wuhan, P. R. China. Prior to his current status, He was invited by chinese scholerships council (CSC) for PhD in materials Science at Huazhong Normal University, Wuhan. His research specialized in Synthesis, Characterizations and functional Properties of Transition Metal and alloy nanostructures and explores the different facile methods to prepare optical and magnetic nanostructures of transition metal oxides, ferrites and binary alloys with controlled size, shape, composition and investigation of structural, optical and magnetic properties by considering the nanoscale effect. He has published more than 30 papers in reputed peer-reviewd journals, and has been participated in several international events on nanoscience and nanotechnology (e.g, World Congress on Chemistry and Chemical Engineering (WCCCE2016) held at Jinan, China during Oct. 23-24, 2016 and International Conference on Applied Mechanics, Mechanical and Materials Engineering (AMMME2016) which is to be held on December 18-19, 2016, Xiamen, China), 4rd International Conference on Chemistry and Biochemical Engineering (CHEMBIO2019) in Xian, China during May 29-31, 2019. He has completed several independent research project in past. Earlier, He has completed his master degree from Hazara University, Pakistan.

Topic: Mechanical properties for iron nanowires prepared by porous anodic alumina membranes

Abstract: The capability of Fe nanowires to generate future technologies and numerous applications in engineering and science cause the researchers to explore and characterize nanowires which includes the chemical characterization, mechanical characterization, physical characterization and so on. Innovative experimental processes and methods to characterize Fe nanowires are always industrialized to find out the best accurate and most blunt ways to extract the outcomes. The content of Fe inside nanowires increases with increasing potential, decreasing deposition temperature and increasing concentration of Fe ions. This can be verified by the polarization curves of depositing Fe Fe, Ni, Ag and Co nanowires. Thermal agitation at low temperature is marginal for activating the surface diffusion and the growth is difficult. Using the electrons tunneling theory, we have argued that the current density of the metals depends on the workfunction and width of double layer. The current density increases with decreasing the length of double layer. The numerical measurement of mechanical properties of iron (Fe) with respect to ultimate tensile strength. Tensile tests of individual metallic Fe nanowires having diameters between 50 and 100 nm were considered. Scanning electron microscope (SEM) is the main equipment which was used in our experiments. Ultimate tensile strength improved as the diameter of Fe nanowires decreased. Our initial investigation on a 100 nm diameter Fe nanowire revealed that the sample cracked at a tensile stress of 13.1 GPa The maximum tensile strength in our tests for Fe nanowire was found to be 16 GPa, which is about 50 times of the bulk value of iron. This greater strength of Fe nanowires can be attributed to smaller diameter of nanowires.

Dr. Nan Li, Associate Professor
School of Automation, Northwestern Polytechnical University, Xi’an, China

Biography: Dr. Nan Li has a B.Eng. in Measurement and Control Technology and Instrumentation from Xidian University (CHN) in 2004, a MSc in Sensors and Electronic Instrumentation from the University of Manchester (UK) in 2008 and a PhD in Circuit & System from Xidian University (CHN) in 2010. In July 2010 he joined the Non-destructive Testing & Evaluation Institute as an Associate Professor in Beijing University of Technology, from where he moved to the School of Automation at Northwestern Polytechnical University in July 2016 as an Associate Professor. His interests are non-destructive testing and evaluation, sensor optimization design, electrical capacitance tomography, control theory and engineering, etc. As the person in charge, he undertook 3 NFSC (National Natural Science Foundation of China) projects, and participate over 3 Key projects of NFSC since 2012, He published more than 40 academic papers and authorized 10 patents in China. He received two ‘Hebei Province Science and Technology Achievement Award’ as second and third author. He is IEEE member, ISIPT member, and Member of China Instrument and Meer Association.

Topic: Inspection System for Grouting Quality of Pre-stressed Ducts

Abstract: Post-tensioned pre-stressed duct is widely used in the construction of bridges. The grouting of post-tensioned pre-stressed duct is a key process of building pre-stressed concrete structure. In the real construction operations, improper ratio of grouting, incorrect grouting operations and man-made errors lead to imperfect grouting, voids and holes inside the ducts. These defects cause the corrosion of pre-stressed steel bars and the reduction of working life of ducts, then threaten the safety of bridges. Therefore, inspecting the grouting quality of post-tensioned pre-stressed ducts has practical significance on preventing the bridge accidents and ensuring the safety of bridges. The capacitive proximity sensor is used to inspect the grouting quality of post-tensioned pre-stressed ducts in this dissertation. The main research works include: (1) Performance evaluation of capacitive proximity sensor, (2) Hardware design of inspection system for grouting quality of post-tensioned pre-stressed duct, (3) Experiments for inspection system for grouting quality of post-tensioned pre-stressed duct. Three two-phase models are inspected by self-designed system, the experimental results indicate that the system can locate the boundary positions of air-water model and air-cement model, the relative errors of measurement are eair-water=6.9%, eair-cement=1.7%; a new method based on Q-factor for inspecting grouting quality of post-tensioned pre-stressed duct is presented, three-phase model is inspected using the new method, the band width and the cutting-off points are defined, the center frequency is selected as the parameter to distinguish the boundary positions, the results illustrate that the new method can locate the boundary positions of air-exuded liquid and exuded water-cement, the relative errors of measurement are e1=6.5%, e2=10.8%.

Copyright © 2015 -2019 5th International Conference on Electrical Engineering and Information Engineering- All Rights Reserved.